Amprobe WT-10 pH Pen-Type Water Quality Meter


The Amprobe WT-10 pH Pen-Type Water Quality Meter measures the pH of water, and is used to troubleshoot corrosion and to test water in wastewater treatment facilities, labs, pools, aquariums, car washes, and aquaculture. The LCD screen displays water pH and temperature simultaneously. Automatic Temperature Compensation (ATC) corrects readings for temperature offsets. One-touch auto-calibration provides for in-field calibration, and requires no additional tools. The pH calibration can be adjusted to meet different solution standards. The hold function saves the reading for recording. The auto power off feature turns the meter off after 20 minutes, and can be disabled for readings that require more time. The meter has a replaceable pH electrode, requires two CR2032 batteries (included), and includes a vinyl pouch and instructions. Specifications pH range 0.00 to 14.00 pH accuracy + or – 0.05 pH calibration 3 points (4.00, 7.00, 10.00), adjustable + or – 0.5 pH resolution + or – 0.01 Temperature compensation 32 to 122 degrees F (0 to 50 degrees C) Temperature accuracy + or – 2 degrees F (0.5 degrees C) Temperature resolution 0.1 degree F/C Operating environment 32 to 122 degrees F (0 to 50 degrees C) at less than 80 percent relative humidity (RH) Dimensions 5.9 x 1.5 x 1.7 inches (149 x 37 x 42 mm) (H x W x D) Weight Approximately 0.17 lb. (76g) Standards Ingress Protection (IP)-66 for water- and dustproof body
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.pH meters and testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agricultural, wine-making and water-testing and for scientific applications.

Amprobe WT-10 pH Pen-Type Water Quality Meter uses the CR 2032 Lithium Battery.

This device use the following battery:
CR 2032 Lithium Battery